Very Important Tips for Civil Site Engineers

Very Important Tips for Civil Site Engineers 

Some tips for Civil Site Engineers, These tips can prove important when you don’t have any measurement at the site or it is not possible to use them every time.On-site measure tricks are important because we do not always have the necessary measurement tools available. Normally, we required to take the measurements of different objects on a daily basis. It is not possible to have the measuring tools, such as tape measure, ruler, or protractor, with us.

For that situation, I will give you tricks for measuring different dimensions such as length and degrees.

Lets, Consider one example if you see your thumb and your index finger, the length between them will be roughly 18 to 19 centimeters.

Similarly , if you open the thumb and the little finger instead, you will get an additional 2 centimeters for a total of about 20 centimeters. This is important tip for civil site engineers, site engineers for the contactor.

But, it is fact human hands are different sizes, so this method is just a way to measure the approximate length.

TIPS FOR CIVIL SITE ENGINEERS

Furthermore, If you want to measure degrees with hand, you can do that also, observe the below the photo.

you can see that your thumb and your little finger exactly make 90 degrees when you spread them on the ground.

And if you spread all other fingers, you can also measure 60 degrees, 45 degrees, and 30 degrees with this method.

Similarly, If you put 4 fingers together you can measure the distance of 3 ” (inches) or 8 Centimeters approximately.

And if you put 2 fingers together, you can measure the distance of 1 1/2″(inches) or 4 centimeters.

Disclaimer Note: This is just an approximate method and calculations. Dimensions may differ from person to person.